Showing posts with label you. Show all posts
Showing posts with label you. Show all posts

Sunday, September 25, 2016

Where can you get repair powder in Dark Souls II

Where can you get repair powder in Dark Souls II


How to get repair powder in Dark Souls II

In Shaded Woods(Ruins) area of Dark Souls 2, there is place with a giant hole on the ground. When you fall through it you will enter a small cave which has acid pits. At first I didn’t know it was an acid pit so I stepped on it and as a result my equipment were damaged. My ring of restoration and ring of blades were completely broken. However, it did manage to save some of my  by using the repair powder on time and then carefully avoiding those pits to make my way out of that cave. I found out later that the damaged stuffs could also be fully repaired by simply resting at the bonfire. However, the ones that were totally wrecked could only be repaired by the Majula Blacksmith (Lenigrast). After this brief yet surprising incident, I went looking for more repair powder so that I can use it later if needed. So where can you get repair powder in Dark Souls II? Where do you buy it?



Note that the repair powder doesn’t fully restore your items and it doesnt work if it’s totally broken. It restores 30 durability to weapons, 50 to armor, 20 to rings. A lot of people have problem finding repair powder but you can find it in many places and also buy it from NPCs like the Blacksmith and Steady Hand McDuff. However, for infinite repair powder you will need to reach the Drangleic Castle and then talk with the merchant named Chancellor Wellager. The Drangleic Castle area is pretty far in the game though. 

Locations of repair powder in Dark Souls 2
Repair-Powder-Locations-Dark-Souls-2

  •  x1 purchasable from Blacksmith Lenigrast in Majula for 2,500 souls
  • x1 found on a corpse in Lost Bastille after riding on top of the elevator down near the entrance from No Mans Wharf
  • x1 purchasable from Steady Hand McDuff in Lost Bastille for 2,500 souls after you give him the Dull Ember
  • x1 in a chest in No Mans Wharf
  • x1 sold by Magerold of Lanafir for 2500 souls.
  • x1 found on a corpse in Iron Keep along with a Soul of a Proud Knight.
  • x5 In Drangleic Castle in the shortcut near the Mastodon Knights, Syan Knights and Archers (near Central Castle Drangleic Bonfire). The room also contains an Estus Flask Shard and 10 Flame Butterflies (It is possible to run past all the knights, however keep in mind that two Syan Knights will follow you in there, and the only way out is by not only pulling a lever, but by opening a door, so prepare to turn around and engage in a 2v1 fight).
  • Rare drop from Grave Wardens in Undead Crypt
  • Dropped by the rats in Grave of Saints
  • Dropped by Sanctum Knights in Dragons Sanctum
  • Infinitely purchasable from Chancellor Wellager in Drangleic Castle, for 2,500 souls each.
Source: Dark Souls 2 Wiki



download now

Read More

Tuesday, September 20, 2016

INTRESTING FACTS ABOUT COMPUTER AND INTERNET YOU MUST KNOW

INTRESTING FACTS ABOUT COMPUTER AND INTERNET YOU MUST KNOW


Computer Facts I Bet You Didn’t Know
  • Another name for a Microsoft Windows tutorial is ‘Crash Course’!
  • Bill Gates house was designed using a Macintosh computer.
  • By the year 2012 there will be approximately 17 billion devices connected to the Internet.
  • Domain names are being registered at a rate of more than one million names every month.
  • E-mail has been around longer than the World Wide Web.
  • In the 1980s, an IBM computer wasn’t considered 100% compatible unless it could run Microsoft Flight Simulator.
  • MySpace reports over 110 million registered users. Were it a country, it would be the tenth largest, just behind Mexico.
  • One of every 8 married couples in the US last year met online.
  • The average 21 year old has spent 5,000 hours playing video games, has exchanged 250,000 e-mails, instant and text messages and has spent 10,000 hours on the mobile phone.
  • The average computer user blinks 7 times a minute, less than half the normal rate of 20
  • The first computer mouse was invented by Doug Engelbart in around 1964 and was made of wood.
  • The first domain name ever registered was Symbolics.com.
  • The world’s first computer, called the Z1, was invented by Konrad Zuse in 1936. His next invention, the Z2 was finished in 1939 and was the first fully functioning electro-mechanical computer.
  • There are approximately 1,319,872,109 people on the Internet.
  • There are approximately 1.06 billion instant messaging accounts worldwide.
  • While it took the radio 38 years, and the television a short 13 years, it took the World Wide Web only 4 years to reach 50 million users.
  • 20.70% of virus writers work under contract for organized crime syndicates.
  • Country with the highest percentage of net users is Sweden (75%).
  • The first popular web browser was called Mosaic and was released in 1993.
  • Amazon, originally a printed book seller company, now sells more e-books than printed books.
  • The first two video games copyrighted in the U.S. were Asteroids and Lunar Lander in 1980.
  • U.S. President Bill Clinton’s inauguration in January 1997 was the first to be webcast.
  • Google uses an estimated 15 billion kWh of electricity per year, more than most countries. However, Google generates a lot of their own power with their solar panels.
  • Up until the 14th of September, 1995, domain registration was free.
  • Every minute, 10 hours of videos are uploaded on YouTube.
  • Over 6,000 new computer viruses are released every month.
  • The first computer mouse, constructed in 1964, was made out of wood.
  • With it’s 800 million interent users, Facebook would be the third largest country in the World.
  • The first hard drive was created in 1979 and could hold 5MB of data.
  • Remember to comment and like , join me on FB here
  • Click here for google plus

download now

Read More

Wednesday, August 24, 2016

How Hack a computer and Login !!!Plus How you can Remote Hack A pc!!!

How Hack a computer and Login !!!Plus How you can Remote Hack A pc!!!


How Hack a computer and Login !!!Plus+ How you can Remote Hack A pc!!!





















Thats How You Do it Easy and simple!!!



download now

Read More

Tuesday, August 23, 2016

Top 15 Android Tools You Must know

Top 15 Android Tools You Must know


Top 15 Android Hacking Apps 2015

Android hacking apps adnroid hacking application top 15 top 10 android hacking applications top ten android hacking apps turn faceniff wifikill apk download android hacking apps
Their are Many Hacking Apps for Android over the internet. Peoples are using Android Phones as a portable Hacking machine. This is the main reason that Android Phones are BAN in some companies so no one can take them inside the company. which may cause damage to the companies.


I am going to share some list of those Hacking APPS but you must have your Android Phone ROOTED which will allow you to use those Hacking Apps.





1. Faceniff 

Faceniff is Android Hacking App Which is normally used to Sniff the Facebook ID over the same network. This works like hell , if you are on the same network and your Faceniff is turned on then it will sniff all the Facebook ID,s which are login from the same Network. This is a paid version on internet but also their are many cracked versions too.





2. DroidSheep 
DroidSheep is also one of the Best Application for sniffing the sessions over the network. It is same and also works same as Faceniff but it don,t only sniff the Facebook sessions but also other sessions in addition too including Facebook. Now you can use this Free of Cost APP DroidSheep for Sniffing.






3. dSploit




dSploit is a nice Android network penetration testing suit. It comes with all-in-one network analysis capabilities. Like most of the other penetration testing tools, it also comes for free. So, you can download and use this app on your Android device and perform network security testing. It has various pre-complied modules to use. The app is designed to be very fast, handy and easy to use, it’s just point and click.








4. Network Spoofer



Network Spoofer is another nice app that lets you change the website on other people’s computer from your Android phone. Download the Network Spoofer app and then log onto the Wi-Fi network. Choose a spoof to use with the app then tap on start. This app is considered as a malicious hacking tool by network administrators. So, don’t try on unauthorized networks. This is not a penetration testing app. It’s just to demonstrate how vulnerable the home network is.







5. Network Discovery

Network Discovery is a free app for the Android device. The good thing is that the app doesn’t need a rooted device. This app has a simple and easy to use interface. It views all the networks and devices connected to your Wi-Fi network. The application identifies the OS and manufacturer of the device. Thus the app helps in information gathering on the connected Wi-Fi network.







6. Shark for Root

Shark for Root is a nice traffic sniffer app for the Android device. It works fine on 3G and Wi-Fi: both network connectivity options. You can see the dump on phone by using Shark Reader that comes with the app. You can also use Wireshark a similar tool to open the dump on the system. So, start sniffing data on your Android device and see what others are doing.






7. Penetrate Pro

Penetrate Pro is a nice Android app for Wi-Fi decoding. The latest version of the app has added many nice features. It can calculate the WEP/WAP keys for some wireless routers. If you have installed an Antivirus app, it may detect Penetrate Pro app as virus. But this app is a security tool and it will not affect or harm your device.






8. WPScan
WpScan is the WordPress vulnerability scanner for Android devices. This nice app is used to scan a WordPress based website and find all the security vulnerabilities it has. WPScan also has a desktop version of the app that is much powerful than the Android app. We know that WordPress is one of the most popular CMS and is being used by millions of websites.

The Android version of the app comes with few nice features. The app was released on Google Play but Google removed the app. The full source code of the app is available from Github. One thing to note that WPScan Android app is not related to the desktop version of WPScan. So, never think it as an official WPScan app.






9. Nessus



Nessus is a popular penetration testing tool that is used to perform vulnerability scans with its client/server architecture. It also released its mobile app to bring its power on mobile devices. Nessus Android app can perform following tasks.

Connect to a Nessus server (4.2 or greater)
Launch existing scans on the server
Start, stop or pause running scans
Create and execute new scans and scan templates
View and filter reports





10. WiFi Kill


WiFI Kill is A great App which is used to cut any user Access over the internet but you must be connected to the internet first and also it requires ROOT ACCESS for your Android Phone. WIFI Kill will show you the Ip addresses of those machines which are connected from your network and if you click on kill or stop this will stop their access to your network even they can,t open the Routers Ip Address.



11. Spoof APP




SpoofApp. It Allows You To Use A Fake Caller Id – A Number That You Are Free To Specify Yourself, In Order To Protect Your Privacy Or To Pull A Prank On Someone. this Can Be Useful In Social Engineering.






12. AnDOSid



AnDOSid Is Application Which Is Used For Dos Attacks From Android Mobile Phones.

AnDOSid Tag’s Posts With Two Unique Numbers Which Relate To The Android Device That Sent The Request. AnDOSid Allows Security Professionals To Simulate A DOS Attack (a Http Post Flood Attack To Be Exact) And Of Course A DDOS On A Web Server, From Mobile Phones.





13. SSHdroid

Secure Shell Or SSH Is The Best Protocol That Provides An Extra Layer Of Security While You Are Connecting With Your Remote Machine.SSHDroid Is A SSH Server Implementation For Android.

This Application Will Let You Connect To Your Device From A Pc And Execute Commands (like “Terminal” And “Adb Shell”).




14. zAnti

Zimperiums Android Network Toolkit is an award winning Penetration Testing framework for mobile devices, used by more than 150000 IT professionals. It is best for penetrating or inding vulnerable network. first it was only "ANTI" a free app but now its sold to some other company and named "zAnti"




15. Nmap



Nmap (network mapper) is one the best among different network scanner (port finder) tool, Nmap mainly developed for Unix OS but now it is available on Windows and Android as well. Nmap for android is a Nmap apps for your phone! Once your scan finishes you can e-mail the results. This application is not a official apps but it looks good.

I hope you liked my article of turning your phone into a Hacking Machine which is really Amazing. Enjoy those All Apps and dont forget to share this great Article so everyone must be aware of those hacking apps for android.
Posted By Sachin Rastogi - Click here to view FB profile

download now

Read More

Tuesday, August 16, 2016

Tips How To Play Clash of Clans That You Have To Know Latest 2015

Tips How To Play Clash of Clans That You Have To Know Latest 2015


Tips How To Play Clash of Clans That You Have To Know Latest 2015


Tips How To Play Clash of Clans That You Have To Know Latest 2015 : Play a game is very fun, especially  games we play are our favorite games, but although fun,  sometimes we must know the tricks and strategies from each level, so that we can complete the level correctly and can move on to the next level. At this time the article I will share a little tip play COC you need to know. Join the following steps.

1. Use The Gems To Buy A Builder


The biggest challenge play "casual free-to-play game" is the currency premium. Premium currency are there in this game are Gems. Gems can be obtained for free when we complete each mission is there, but it was very hard obtained. At the beginning of this game, you will be given two builder for free. However, to get the third builder is not easy. You need 500 Gems to get third builder. So, do not use the Gems you already get to shorten the time of your building. Use the Gems that you have to buy a builder or workers. As with many workers we can make the building more.

2. Attack

If you already have a lot of troops, dont hesitate to attack another village. Because by attacking other villages, you will get a lot of Gold, Elixr of the Gold Mine, or a Collector can Elixr used to build desamu. Dont forget to upgrade Gold Mine and the Collector that you have so that Gold can be obtained Elixr and accommodated them all. Considering the attack was crucial in Clash of Clans make sure you always get Elixr spent doing research in the Laboratory. By doing research and you will be led to troops that would tear apart the mempermudahmu opponent and steal their resources. If storage-mu is full then you will be easier to upgrade many things according your wishes.

3. Finish Achievements


Achievements that are in their own Clans Clash of all kinds like Gold Storage upgrade, get 50 stars, stealing Gold or Elixr, and others. By completing Achievements, you will receive a gift Gems that can be used to add to the builder.

4. Join To Other Clan



If you join another clan, you will get more information about how to make you stronger. Share your troop and get troop is a way that you could grow faster in games the CoC. If friends that is in thy hand out clan troop strength, you will be able to survive when the desamu attacked.

Thats a little tip that I can inform you, I hope it may be useful

Source: Jalantikus.com
Editor : Yanuarie Firmansyah

This is update information of Tips How To Play Clash of Clans That You Have To Know Latest 2015
Thankyou you have to be my visitors in MASARIETECH.BLOGSPOT.COM I hope it can be usefull and Im  happy if you can came back again

download now

Read More

Friday, August 5, 2016

Complete List of Windows 10 Shortcut Should You to Know

Complete List of Windows 10 Shortcut Should You to Know


Since the beginning launched of Windows 10, a lot of things that we can explore. As new features, user interface more friendly, and much more. One of the highlights is Shortcut which is one important element to support the activities for use Windows 10.

There are many new shortcuts in Windows 10. Because along emergence of new features such as Task View, Window Snapping, Microsoft Edge and others here weill howdywindows will give list to you. Whether it be a new shortcut or are already present in Windows before.



Global Windows Shortcut

Before trying a new shortcut in Windows 10. There are good you also know some shortcuts that can be used by all versions of Windows, including Windows 20 10. Following the shortcut list.


Universal Windows 10 Shortcut

Below howdywindows will provide a list of shortcut Windows 10 in general. Heres the list.

Windows Key: Open the Start Menu.
Windows Key + Q: Do search and Cortana with Voice Command.
Windows Key + S: Perform search and Cortana with Keyboard Input.
Windows Key + I: Opens Settings.
Windows Key + A: Open Action Center.
Windows Key + L: Lock Windows and switch to the Screen Lock screen.
Windows Key + H: Doing Sharing content, with application notes related supports content sharing features.
Windows Key + K: linking Windows 10 to the wireless display and audio devices.
Windows Key + X: Opens the Power User.
Windows Key + G: Opens the Game Bar to take pictures or make a video recoding in Game Windows 10.
Windows Key + D: Displays Desktop (and minimize all the windows there).
Windows Key + E: Open the File Explorer.
Windows Key + Space: Changing the keyboard language (if you have more than one language).
Windows Key + R: Opens Windows RUN.
Windows Key + P: Access Project menu Screen.
ALT + F4: Closes the current window or open the Power menu if it is on the desktop.
And here below howdywindows will provide a list of shortcut based on the features available in Windows 10.



Task View

Task View are present in Windows 10, presents display window switching feature that is similar to Mission Control on Mac OS. Heres a shortcut that you can use the Task View.

Windows Key + Tab: Opens Task View and displays all open windows.
ALT + TAB: It is not something new in Windows 10. Its function is to switch between the active Window.


virtual Desktop

Features that are still associated with Task View, providing the ability to categorize window that one type into one group Desktop, as well as providing full control to the user to set each group window on Virtual Desktop.

a complete list of shortcut windows 10 (2)

Heres a shortcut that you can use on the Desktop.

Windows Key + CTRL + Arrow left / right: Move desktop before or afterwards.
Windows Key + CTRL + D: Creating a new desktop.
Windows Key + CTRL + F4: Closes the desktop.
Windows Key + TAB: Opens Task View.


Windows Snapping

Features are present since Windows 7 is, allows the user to set the size of the window that opens. So that the user can set the corner with 4 different windows.

a complete list of shortcut windows 10 (3)

Heres a shortcut that you can use on Windows Snapping.

Windows Key + Left Arrow: Snap window to the left side of the screen.
Windows Key + Right Arrow: Snap window to the right side of the screen.
Windows Key + Up Arrow: Snap window to the side of the screen.
Windows Key + Down Arrow: Snap window to the bottom side of the screen.
In addition, you can make the window size to 1/4 screen. For example, using the shortcut Winkey + Left arrow and then Winkey + Arrow up, it will create a window size of 1/4 on the top left side.



Microsoft Edge

The latest browser available only in Windows 10, it is also not spared from Microsoft in terms of making users more productive by using a shortcut.

a complete list of shortcut windows 10 (5)

The following 28 shortcut that you can use in Microsoft Edge.



Command Prompt / PowerShell

In Windows 10, Microsoft remodel Command Prompt and PowerShell by presenting features that support you can operate it. As support for copy and paste to the clipboard, the line wrapping to facilitate the reading order, simplify the window size, and even the ability to make the window look transparent.

a complete list of shortcut windows 10 (4)

Heres a complete list of shortcuts that you can use in Command Prompt (and could also be in PowerShell).



Windows Narrator

Windows Narrator is a Screen Reader features are present since Windows 2000. Narrator works by reading the dialog box or window in any active window, then translating from visual to audio. The features are very helpful especially for people with visual impairment.

Heres a complete list of shortcuts that you can use in Windows Narrator.

Ctrl: Lay off the screen reading voice.
Caps Lock + M: Running a screen reading voice
Caps Lock + Page Up: Increase volume.
Caps Lock + Page Down: Decrease volume.
Caps Lock + Plus: Increase the speed of sound in reading.
Caps Lock + Minus: Lowering the speed of sound in reading.
Caps Lock + C: Reading the current date and time.
Caps Lock + D: Reading the selected item.
Caps Lock + S: Read the item with penejaan said.
Caps Lock + V: Repeating phrases.
Caps Lock + W: Reading the active window.
Caps Lock + H: Reading the contents of the document.
Caps Lock + Ctrl + U: Reading the active page.
Caps Lock + U: Reading the next page.
Caps Lock + Shift + U: Reading the previous page.
Caps Lock + Ctrl + I: Reading the paragraph currently selected.
Caps Lock + I: Reading the following paragraphs.
Caps Lock + Shift + I: Reading the previous paragraph.
Caps Lock + Ctrl + O: Reading another line that is currently selected.
Caps Lock + O: Reads one line next word.
Caps Lock + Shift + O: Reads one line of the previous word.
Caps Lock + Ctrl + P: Reading the word that is currently selected.
Caps Lock + P: Reading the next word.
Caps Lock + Shift + P: Reading the previous word.
Caps Lock + R: Read all the items that are in the area currently selected.
Caps Lock + Q: Move to the last item that is currently selected.
Caps Lock + Y: Move to the beginning of the text.
Caps Lock + B: Move to the end of the text.
Caps Lock + J: Move to the next heading.
Caps Lock + Shift + J: Move to the previous heading.
Caps Lock + K: Move to the next table.
Caps Lock + Shift + K: Move to the previous table.
Caps Lock + L: Move to the link / link next.
Caps Lock + Shift + L: Move to the link / link earlier.
Caps Lock + F3: Move to the next cell in a row.
Caps Lock + Shift + F3: Move to the previous cell in a row.
Caps Lock + F4: Move to the next cell in a column.
Caps Lock + Shift + F4: Move to the previous cell in a column.
Caps Lock + Space: Doing the main action.
Caps Lock + Right Arrow: Move to the next item.
Caps Lock + Left Arrow: Move to the previous item.
Caps Lock + Up / Down Arrow: Changing the display narrator.
Caps Lock + F1: Displays a list of commands narrator.
Caps Lock + F2: Displays a list of commands available on the currently selected item.
Caps Lock + F12: Switch to Character reading.
Caps Lock + Enter: Switch search mode.
Caps Lock + Num Lock: Move the mouse mode.
Caps Lock + A: Changing the verbosity mode.
Caps Lock + Esc: Exit Narrator.
Caps Lock + Z: Lock Key Narrator.
Caps Lock + G: Move the mouse over the narrator to mouse over the system.
Caps Lock + T: Move the mouse over the narrator to a pointer.
Caps Lock + Backspace: Retreat to one of the previous item.
Caps Lock + Insert: Move to the last item.
Caps Lock + F7: Reading the column that is currently selected.
Caps Lock + F8: Read the line that is currently selected.
Caps Lock + F9: Reading the column header that is currently selected.
Caps Lock + F10: Read the new header that is currently selected.
Caps Lock + F5: Read between the lines and columns Narrator.
Caps Lock + F6: Move to the table cell.
Caps Lock + Shift + F6: Move to the cell content.
Caps Lock + Ctrl + Left Arrow: Directs the narrator pointer upwards.
Caps Lock + Ctrl + Down Arrow: Directs a similar item to the next.
Caps Lock + Ctrl + Up Arrow: Directs to previous similar items.


file Explorer

Although some already present in previous versions of Windows, but in line with the release of Windows 10, File Explorer does not escape from the addition of a new shortcut list.

a complete list of shortcut windows 10 (6)

Heres a list of shortcuts File Explorer in Windows 10.

Win + E: Open the File Explorer.
Esc: Cancels file operations.
F2: Rename
F2 then Tab: Threaded rename - files quickly.
F3, Ctrl + E or Ctrl + F: navigate to the Search Box.
F4: Open the address bar drop-down menu.
F5: Refresh.
F6: Navigating between the panes path.
F10: Displays the Menu Bar.
F11: Make window Fullscreen.
Home: Towards the beginning of the file.
End: Towards the end of the file.
Up / down arrow: Move up / down.
Shift + F10 or Menu key: Opens Right click context menu.
Del: Delete the file / folder.
Shift + Delete: Delete without moving it to the Recycle Bin.
Enter: Open the file / folder.
Alt + Enter: Open the Properties window.
Ctrl + X: Cut.
Ctrl + C: Copy.
Ctrl + V: Paste.
Ctrl + W or Alt + F4: Closes the window.
Ctrl + Z: Undo.
Ctrl + Y: Redo.
Ctrl + A: Select all.
Ctrl + N: Open a new window File explorer.
Ctrl + Shift + N: Create a new folder.
Alt + P: Opens the Preview panel.
Alt + Shift + P: Displays details more terprinci File.
Ctrl + +: Change the size of a column
Ctrl + Shift + 1: Size Extra Large icons.
Ctrl + Shift + 2: Size Large icon.
Ctrl + Shift + 3: Size Medium icon.
Ctrl + Shift + 4: Size Small icon.
Ctrl + Shift + 5: Change the file into a List.
Ctrl + Shift + 6: Change the file into Details.
Ctrl + Shift + 7: Change the file into Tiles.
Ctrl + Shift + 8: Change the look of files into Content.
Alt + Up: Move one level up the folder path.
Alt + Left or Backspace: Back to the place / previous folder.
Alt + Right: Forward to the folder that you visit thereafter.
Alt + D: Jump into the address bar.
Ctrl + Shift + E: Make a list of existing folders in a main folder.
Ctrl + F1: Show or hide a ribbon panel.
Now that he gaes complete list of shortcuts that you can praktikan in Windows 10. As a suggestion, it helps you bookmark this page for future if howdywindows find a new shortcut, then the article will be updated back !.

download now

Read More

Tuesday, August 2, 2016

Imagine You and Me 1080p 720p Bluray HD

Imagine You and Me 1080p 720p Bluray HD


Imagine You and Me 1080p / 720p MP4, MKV

Story line: Alden is Andrew, while Maine is Gara, who has one problem: shes NBSB, No Boyfriend Since Birth.  

Showing Date: Imagine You and Me is scheduled to hit theaters in July 13.

Support ALDUB: Watch  Imagine You and Me on Theaters nationwide, Wednesday July 13!

Imagine You and Me  Screen Shots in HD

Imagine You and Me 1080p
Imagine You and Me 1080p

Main Cast:
  • Alden Richards as Andrew 
  • Maine Mendoza as Gara 
Imagine You and Me 1080p
Imagine You and Me 1080p

Imagine You and Me 1080p Download and Stream Links
 

Supporting Cast:
  • Jasmine Curtis-Smith
  • Irma Adlawan
  • Yayo Aguila
  • William Martinez
  • Luis Alandy
  • Elijah Alejo
  • Cacai Bautista
  • Jerald Napoles
  • Cai Cortez
**This page will be update soon!

download now

Read More