Fix Lenovo A319 bootloop – How to Flash Install Firmware

Fix Lenovo A319 bootloop – How to Flash Install Firmware

Complete guide how to recover, revive bootloop Lenovo A319. This is your last resort how to recover it! Just follow tutorial below.

also read ? Change Bluestacks Resolution using Notepad

What you Need

• Firmware (Stock ROM) Lenovo A319: Download
• Latest Version of SP flash tool : Download
• Lenovo A319 USB Driver (MTK Driver) : Download

To ensure what is firmware used by your device, you can check by go to Setting ->About -> Software Information ->Build Number.

Flashing Lenovo A319

• Install driver for Lenovo A319 that already downloaded before.
• Extract firmware and flash tool then save in drive d:
• Then remove your back case, battery, sim card and SD Card  if installed
• Now, Connect your Lenovo A319 to PC or Laptop, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
• Then, release USB data cable from the PC.
• Open SP flash tool software (for windows 7 or 8 you can run it by administrator) and click scatter load. find Lenovo A319 scatter storage location earlier.
• In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt

• Then you click options ->Download -> then check DA DL all with checksum.

• On download tab, ensure you have selected download only option from dropdown menu, see below picture.

• Then, click download button on top right and connect your Lenovo A319 with USB cable in phone switch off position.

• Process will run automatic, and you can see the red stripe showing download percentage at bellow
• When your process complete, you can see a green circle with tick mark.

• Then disconnect your Lenovo A319
• Put you battery again. 
• Then, start your Lenovo A319. (remember, on the first booting it will take a long time to start)
• Done! You have successfully flash / install firmware on your Lenovo A319.

download now

Read More

Flash Smartfren Andromax – Fix bootloop C3 Error Off total

Flash Smartfren Andromax – Fix bootloop C3 Error Off total

If there are problems with your C3 Andromax Smartfren , suppose happened bootloop or shuts it down, you have to do a re-flash or install recovery img on the Andromax Smartfren. Flash process or flashing the same as the reinstall process on a computer or PC, so that you will get a flashing initial performance as well just come out of the factory . So flashing Smartfen Andromax C3 is a smart way if Smartfen Andromax C3 is not responding and can not be power on or other terms are bootloop.

also read ? How to Root Smartfren Andromax

Tutorial:

• Download Sdimage to Andromax C3 AD6B1H here
• Once you have finished downloading files over, now extract the file, then move sdimage folder to the SD card.
• Put the SDimage into the device Andromax C3
• Then turn on your C3 Andromax, After Andromax C3 turns on and the position ready for use, you will find a message read more and iconic blue box. You can click or tap on the text.
• Flash process will start, and lasted for 15 to 20 minutes. If you see an update message success, then the flash process is complete.
• Done!

download now

Read More