How to check your laptop battery health in Windows 10

How to check your laptop battery health in Windows 10

Is your laptops battery draining faster than normal? For example- your battery used to last 5 hours but now barely an hour. Or,the battery indicator shows sudden or sharp drop in the percentage remaining. Sometimes even new laptop batteries can show such signs. Did you get a faulty battery or an old one with a very low capacity? So how do you check if your battery is in working condition or is it really damaged and needs to be replaced? If youre a Windows user there no need to install a separate program for this because Windows has a simple command that helps you easily check the condition or health status of your laptops battery.

How to checking laptop battery Condition in Windows 10

1. Click Start >> Type CMD in the search bar
   
2. Right click on "Command Prompt" and select "Run as administrator"
   
3. Now in the command prompt type cd %userprofile%/Desktop >> Press Enter
   
4. Type powercfg -energy >> Press Enter 

After a few minutes the command will generate an energy-report.html file, which will be saved on your desktop. Simply head to desktop and then open that file. The energy report has full information about your Laptop. However, you dont need to go through all of that to check the battery health. Simply scroll down and find a section called "Battery Information". For simplicity press ctrl+F and then type "Battery Information" in the search bar.

The things you should look at are the(Factory) Design capacity and Last Full Charge values. If your Last Full Charge is closer or not very low compared to the Design capacity, then your battery is in good condition/health. However, if its too low then your battery is in poor health and needs to be replaced because it cannot hold charge at its design capacity. For example- in the picture  above you can see Design Capacity is 47520 but the Last Full Charge is 2610. This indicates your battery now holds a maximum of only 5.5% charge of the original capacity. This battery barely lasts 15 minutes.

download now

Read More

How to setup Broadband Internet connection on Windows laptop or PC

How to setup Broadband Internet connection on Windows laptop or PC

If by any chance your router does not have a working WAN port, you will have to directly connect the Ethernet cable to your PC or laptop for the broadband internet connection to work. Most routers today support high speed Wi-Fi so there is hardly any use for the LAN port except in offices where several desktops are in close proximity. To setup broadband internet on your Windows laptop or desktop via Ethernet cable, you will simply need to connect the cable to your PC and then setup a Broadband connection using the username and password provided by your Internet Service provider.

1.  Connect the broadband internet cable to your laptop’s Ethernet port
2. Now you will see some blinking lights on the port, which tells you that the connection is working
3. Now press windows key and search “network and sharing” and “select network and sharing center”
4. Click on “Setup a new connection or network”
5. Click “Broadband (PPPoE)
6. Now type the username and password provided by your ISP (internet service provider)
• You can also check mark “Remember this password” if you don’t want to login username and password after every reboot or shutdown
• You can name the connection anything you like
7. Click “Connect” and your laptop will start connecting to broadband connection.

You should now be able to browse the internet. If you get connection failed error 651 or error 619, it means you have input wrong username and’;’p password
If the desktop icon on the bottom right of your laptop screen has a red cross on it, it means the connection has no internet.

download now

Read More

Cara Memperbaiki Keyboard Laptop PC Yang Error

Cara Memperbaiki Keyboard Laptop PC Yang Error

Cara Memperbaiki Keyboard Laptop / PC Yang Error - Keyboard adalah komponen terpenting bagi sebuah perangkat PC terutama laptop karena dari semua hardware yang dibutuhkan pada PC maka keyboard lah yang paling banyak digunakan karena fungsionalitasnya yang tak terbatas. Namun bagaimana jika keyboard pada laptop mengalami error atau rusak?

Mengalami kerusakan keyboard pada laptop tentu sangat menyusahkan apalagi jika rusaknya terlalu parah, bisa dipastikan butuh budget besar untuk mengganti keyboard yang baru. Biasanya kejadian seperti error pada keyboard laptop disebabkan karena software ataupun keyboard itu sendiri, jadi untuk mengetahui penyebab sebenarnya, cobalah perbaiki dulu softwarenya dengan cara uninstall driver keyboard laptop, cara ini cukup berhasil karena saya sendiri sempat mengalaminya, untuk lebih jelasnya simak tutorialnya dibawah ini.

Cara Menginstall ulang Driver Keyboard Laptop PC

Tutorial yang bisa dibilang cara memperbaiki keyboard laptop yang error ini menggunakan laptop windows 7 namun cara ini juga berlaku untuk windows 8 / 8.1, jadi simak baik-baik.

• Klik tombol start -> (klik kanan) komputer -> properties

• Klik device manager

• Klik keyboard -> (klik kanan) PC/AT Enchaced PS/2 Keyboard -> Uninstall

• Restart

Setelah anda klik uninstall maka laptop akan merestart dengan sendirinya, setelah laptop hidup kemudian laptop akan menginstall kembali driver keyboard setelah itu laptop kembali merestart, setelah hidup coba cek tombol mana yang masih error, cek satu per satu di notepad.

download now

Read More

Cara Menjadikan HP Android Sebagai Mouse Laptop PC

Cara Menjadikan HP Android Sebagai Mouse Laptop PC

Cara Menjadikan Smartphone Sebagai Mouse Untuk Laptop PC ? Halo gaes, ketemu lagi dengan kami tim redaksi blog infosaged, sesuai judul pada artikel kali ini saya ingin membahas info mengenai bagaimana cara menggunakan smartphone atau hp android sebagai mouse untuk laptop, notebook ataupun netbook, dimana dengan menjadikan hp android sebagai mouse laptop tentunya memudahkan kita apabila sewaktu-waktu mouse atau touchpad laptop kita mengalami kerusakan sehingga kita dapat menggunakan smartphone sebagai penggantinya. Mungkin ada diantara anda yang bertanya-tanya ?lho, kok bisa?? ya jawabannya tentu saja bisa karena pada dasarnya android memiliki fitur hotspot wifi dimana fitur wifi inilah yang nantinya kita manfaatkan sebagai alat/jaringan untuk mengkoneksikan antara hp android dan laptop meski tanpa menggunakan kabel, namun mesti anda ingat bahwa cara menjadikan hp android sebagai mouse laptop ini hanya digunakan untuk keperluan mendesak saja atau pada saat-saat tertentu bukan untuk permanen.

Cara Menjadikan HP Android Sebagai Mouse Laptop PC

Terus bagaimana cara menggunakan hp android sebagai mouse laptop, caranya tentu saja mudah sekali anda hanya perlu menginstall aplikasi dan software yang disebut ?wifi mouse? dimana aplikasi/software ini bisa kalian download di google play dan di website dan kebetulan aplikasi tersebut banyak sekali rupanya. Aplikasi wifi mouse ini juga harus anda install di hp android dan di laptop, berikut saya tutorialkan cara menjadikan smartphone sebagai mouse untuk laptop pc.
Silahkan di download :

• Download wifi mouse untuk android
• Download wifi mouse untuk windows

Kedua aplikasi wifi mouse diatas harus di install ke masing-masing perangkat baik laptop maupun android, nah untuk masalah install ini saya tidak bahas karena saya yakin anda sudah mengerti, setelah proses install apliaksi dan software wifi mouse selesai sekarang lanjut ke tahap bagaimana mengkoneksikannya, simak tahap-tahapnya dibawah ini.

1.    Hidupkan Hotspot Wi-fi di ponsel android anda caranya sapu layar dari atas kebawah lalu tap Hotspot wi-fi kayak gambar dibawah ini, atau biar gampang masuk ke pengaturan -> klik selengkapnya -> klik menambatkan & hotspot portable -> hidupkan hotspot wi-fi portable -> selesai.

2.    Setelah hotspot wi-wifi android berhasil dihidupkan laptop / computer akan mendeteksi jaringan hotspot wi-fi tersebut, seperti ini.

3.    Selanjutnya, buka aplikasi wifi mouse di hp android anda lalu klik server, setelah itu anda akan menemukan nama laptop pc anda, silahkan di klik.

4.    Pilih mouse.

5.    Langkah terakhir, mainkan atau sapu jari anda di layar smartphone terus perhatikan apakah cursor mouse di laptop bergerak, kalau bergerak artinya anda SUKSEKS eh salah SUKSES :) ..
6.    Selesai

Nah, sekarang bagaimana, mudah kan cara menjadikan hp android sebagai mouse laptop, kalau anda tertarik silahkan monggo dicoba, sekian informasi mengenai cara menjadikan smartphone sebagai mouse laptop semoga membantu anda.

download now

Read More

Cara Mudah Instal Laptop Dengan Usb WindowsToUSB lite 1 3 2

Cara Mudah Instal Laptop Dengan Usb WindowsToUSB lite 1 3 2

WindowsToUSB lite 1.3.2 adalah versi terbaru dari software WindowsToUSB yang dapat kita gunakan untuk membuat instalasi windows dari USB Flashdisk dengan mudah dan cepat. Dengan menggunakan software WindowsToUSB ini, anda dapat dengan mudah membuat bootable windows ke flashdisk dari file ISO windows yang anda punya. 

Tampilan antarmuka dari software WindowsToUSB ini juga sangat mudah dipahami, anda tinggal menjalankan program ini, untuk kemudian tinggal anda pilih sumber file ISO dari folder  mana, dan pilih target flashdisk yang ingin anda buat bootable windowsnya, klik start dan tunggu prosesnya sampai selesai.

Download WindowsToUSB lite 1.3.2

From FireDrive

WindowsToUSB lite 1.3.2 (2 Mb)

From MirrorCreator

WindowsToUSB lite 1.3.2 (2 Mb)

download now

Read More

Fix Plugged in not charging laptop battery problem

Fix Plugged in not charging laptop battery problem

All lithium ion laptop batteries have fixed life span and as time passes these batteries lose their capacity to hold a charge. Recently my laptop battery died and I had to replace it with a new one. However, I noticed that the battery would only charge till 93% and sometimes not beyond 96%. Then it stops charging as if its fully charged. When I clicked on the battery meter at the bottom right taskbar (in Windows 10), it showed either 96% or 93% available (plugged in not charging). I found that many users have faced similar problem of battery not charging fully with a new laptop battery. Old laptop batteries may also face similar issue with the battery indicator showing wrong reading- for example: getting stuck on 98% and not charging.  Fortunately, there are some simple steps that can get your laptop charging to a full 100%.  Read below to find out how to fix battery indicator not showing full charge in Windows laptop:

How to fix 93% available (plugged in, not charging) laptop battery issue

1. Shutdown your laptop
2. Take out the battery
3. Disconnect the power supply or charger
4. Now press the power button and hold it for 45 seconds or 1 min
5. Connect the power supply 
6. Now put the battery back on

After completing the above steps, turn on your computer and now check the battery meter. It should show 100% Fully Charged or at least start charging from the point where it was previously stuck. If that didnt fix the problem, disconnect power supply and remove the battery, and then leave your laptop like that for an hour. After that your laptop battery should charge like normal. 

download now

Read More

Download SpeedFan 4 49 Mengatasi Laptop Komputer Yang Cepat Panas

Download SpeedFan 4 49 Mengatasi Laptop Komputer Yang Cepat Panas

Software ringan yang bernama SpeedFan 4.49 merupakan sebuah software ringan yang berfungsi untuk memaksimalkan kecepatan kipas pada laptop / komputer yang kita gunakan.

Jika sahabat merasa kalau laptop / komputer cepat panas apalagi biasa menggunakan laptop / komputer untuk jangka waktu yang lama, maka SpeedFan ini sangat cocok untuk sahabat gunakan.

Cara kerja software ini adalah meningkatkan kecepatan kipas laptop / komputer yang kita gunakan agar bekerja sebaik mungkin dan semaksimal mungkin agar Laptop / Komputer yang digunakan tidak mudah panas.

Cara Menggunakan :

1. Buka SpeedFan yang sudah anda install kemudian klik tombol Configure
2. Pilih menu Fan Control.
3. Pilih (centang) Advanced fan control.
4. Klik tombol ‘Add‘. Ini akan menampilkan jendela baru untuk menciptakan profil pengaturan.
5. Pilih profil (yang baru dibuat) yang tertera di sana.
6. Pilih (centang) Controlled speed.
7. Pilih jenis sensor yang diinginkan (bisa ada lebih dari 1 jenis, tergantung komputer yang digunakan).
8. Pilih ‘MAX of speed‘ agar kipas menggunakan batas kecepatan maksimal sebagai acuan.
9. Pada bagian Temperatures, klik tombol ‘Add‘. Ini akan menampilkan jendela baru untuk memilih jenis sensor yang diinginkan. Pilih saja salah satu sensor yang paling tinggi dalam pembacaan suhunya (suhu tiap sensor bisa dilihat pada tampilan utama SpeedFan).
10. Klik sensor suhu tersebut.
11. Pada tabel ini, kita bisa menurunkan atau menaikkan batasan suhu yang diinginkan agar kipas bekerja pada kecepatan maksimal (100%). Lalu klik tombol ‘OK‘.

Note : Sering tidak suport untuk Netbook namun tidak semua netbook.

Link Download :

? Download SpeedFan 4.49 ( Solidfiles 2 Mb )

? Download SpeedFan 4.49 ( Link Alternative 2 Mb )

* Jika Sahabat ingin meriquest, silahlan tinggalkan komentar sahabat dikolom komentar atau sahabat bisa inbok saya difacebook dan chat di BBM

- FACEBOOK : Rizky Rastafara
- Pin BB : 7D71DCDB

download now

Read More

How to turn your laptop into a Wi Fi hotspot or temporary router – Windows 10

How to turn your laptop into a Wi Fi hotspot or temporary router – Windows 10

Here is the story of why I wanted to turn my laptop into a Wi-Fi hotspot or a temporary router: Last week we had a big thunderstorm and a lightning seems to have struck our cable internet. This fried the WAN port of my router and the DSL port was no longer blinking green to show a working internet connection. All of the LAN ports were working fine but I didn’t have enough Ethernet cable lying around to connect all of my home computers. So I decided to do learn how to broadcast Wi-Fi from my laptop to other devices or how to setup my laptop to work as a router. You have probably heard of wi-fi hotspots on smartphones and the same features is available on laptops with Wi-Fi or WLAN cards. While using a laptop as Wireless Access Point is not as effective as a router, it will come handy on situations where you only have an Ethernet cable and you want to share Wi-Fi to other devices on the floor. Here are steps to enable Wi-Fi hotspot on Windows Laptops or desktops connected to a DSL broadband connection:



Note: I am assuming you have a normal broadband internet cable connection. Connect the Internet cable (with RJ-45 connector) to your Laptop or Desktop PC’s Ethernet port. Now you should see green or yellow light blinking on the Ethernet port indicating successful connection

Before you setup the Wi-Fi hotspot you need to setup your broadband internet connection: Read: How to setup Broadband cable Internet connection on Windows PC


Now follow these steps to setup your laptop’s wi-fi hotspot

1. Press windows key + X >> Select “Command Prompt (Admin)”
• Alternatively, press Windows and type “cmd” >> Right Click on “Command Prompt” and select “Run as administrator”
2. Now in the Command Prompt, type: netsh wlan set hostednetwork mode=allow ssid=networkname key=password
• (Replace “networkname” with any name and “password” with a password of your choice for your laptop Wi-Fi hotspot)
3. Now type: netsh wlan start hostednetwork
4. Now your hosted network will start but you will have to tweak some settings before accessing the internet
5. Press Windows key and type “network connections” >> select “view network connections”
6. Right click on the your active broadband connection and click “properties”
7. Go to “Sharing” tab and click the check box to “Allow other network users to connect through this computer’s internet connection.”
8. From the drop down select the newly created hosted connection (it could be named something like this- “Local Area Connection *12) >> Click Ok

Now you can connect other devices such as smartphones, tablets and laptops to the newly setup Wi-Fi hotspot using the password you assigned on step two above. If your Wi-Fi hotspot laptop goes to sleep, you will have to run command prompt as admin and again type: netsh wlan start hostednetwork

If the broadband connection on your Wi-Fi hotspot laptop is abruptly disconnected and reconnected, your Wi-Fi hotspot will stop working. To make it work again, turn off the Wi-Fi on your laptop (the one setup as a hotspot). Then turn it back on. Open command prompt as admin and type: netsh wlan start hostednetwork

Other important commands for Windows laptop hosted network are listed below:

To temporarily stop the Wi-Fi hotspot: netsh wlan stop hostednetwork

To again start Wi-Fi hotspot on your laptop: netsh wlan start hostednetwork

To allow or disallow hosted network:
netsh wlan set hostednetwork mode=allow
netsh wlan set hostednetwork mode= disallow

If you want to change your Wi-Fi hotspot network name (SSID) and password :
netsh wlan set hostednetwork ssid= newSSID
netsh wlan set hostednetwork key=newpassword

How to delete newly created Wi-Fi hotspot or wireless access point on Windows laptop

You can also permanently delete the newly created hosted network by following the steps below. Be very careful not to delete anything else than what has been instructed below

1. Press Windows >> Type “regedit” >> Right click on it and select “run as administrator”
2. Navigate to the following path in the Registry: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWlansvcParametersHostedNetworkSettings
3. On the right, Right-click on HostedNetworkSettings key >> Click Delete
4. Restart your laptop

After deleting the network from registry open Command Prompt as admin type: netsh wlan show hostednetwork. It will show you that hosted network is not configured. The last thing you have to do is go to “Network and Sharing” and set your broadband connection to its default settings. Here are the steps:

1. Press Windows Key and type “view network connections” and click it
2. Right click on your active broadband connection and select Propertites
3. Go to sharing tab >> unselect “Allow other network users to connect throught this computer’s internet connection”
4. Select OK

That’s it. Now the hosted network has been removed from your laptop’s network settings.

download now

Read More

Acer One 10 S1001 10P1 1GB Atom Z3735F Laptop

Acer One 10 S1001 10P1 1GB Atom Z3735F Laptop

Nowadays, owning a laptop is more than just a sign of luxury. Technology made these machines essential to both students and employees as they can now learn and do work over the Internet. Having a reliable portable computing machine assures everyone that they can do their research, assignments, and emails anytime, at anywhere. Get the Acer One 10 S1001-10P1 1GB Atom Z3735F 10.1" 2 in 1 Laptop for productivity on the go.

also read ? Acer One 10 S1001-10P1 1GB Windows 10 Laptop

The Acer One 10 S1001-10P1 features the Acer Snap Hinge—a latch-free magnetic hinge—that makes transitioning between modes easy. It does away with awkward mechanical connectors so you can snap the tablet and keyboard together or pull them apart effortlessly. Position your laptop the way you want it to, depending on what you need to do--Notebook mode for typing, Pad for touch tasks, and Tent or Display modes for entertainment. 

The Aspire Switch 10s Intel Atom Z3735F Processor at 1.33 Ghz, 1GB RAM, and Windows 8.1 operating system work hand-in-hand for a smooth and fast experience. Never stop being productive as you can take advantage of the AcerCloud storage that allows you to access your files anywhere on any device. 

also read ? Asus X453SA Laptop Windows 10 Celeron

See what you’re working on in HD glory with the laptop’s 1280 x 800p display--everything will look crisp and clear. It also comes with the IPS technology that makes the details or color saturation more evident when viewing the screen from wide angles. From movie viewing to computer gaming, enjoy all the visuals on your Acer Switch 10.

Specs:

• Operating System: Windows 8.1 with Bing
• CPU (Model + Speed): Intel Atom Z3735F Processor 1.33GHz
• RAM and Hard Disk Drive (HDD): 1GB RAM and 32GB eMMC and 500GB HDD
• Graphics: Intel HD Graphics
• Memory and expandability options: 32GB eMMC and 500GB HDD
• Connectivity options: 802.11 b/g/n, Bluetooth 4.0
• Camera resolution (MP): HD Webcam
• Battery type and charge (mAh): 6000 mAh Battery
• Power Consumption: 100-240 VAC, 50-60 Hz 
• Sale Now! ?12,499 
• Before ?25,599

download now

Read More